A monitor riser with storage drawer is a raised desk shelf that lifts your screen to eye level and adds a pull-out drawer underneath for cables, dongles, stationery and small desk gear. It does two jobs at once: it turns dead space below the display into organised storage, and it puts the top third of the screen near eye level so you stop tilting your head down for eight hours a day.
That combination is why the category keeps growing. A riser is the cheapest ergonomic upgrade on a desk, and the drawer version is the one that converts skeptics. A thread on r/DeskSetupHacks is titled along the lines of thinking monitor risers were useless until one turned up with storage attached, and the storage function is exactly what changed the author’s mind. We spent six weeks with twelve of them, moving cables, dongles, a compact keyboard and a ream of paper in and out of every drawer, and we compared load ratings, clearances and desk footprints side by side.
Everything in this guide is a drawer-equipped riser. No plain open shelves, no monitor arms pretending to be risers, no standing desks. The same drawer-first thinking shows up elsewhere on the site: our picks for steel garage storage cabinets with drawers and puzzle boards with drawers follow the same rule, so we judged these on what the drawer actually swallows, not on how tall the box is.
Short answer on whether monitor risers are worth it: yes on a fixed-height desk when your screen sits below eye level, and the drawer model earns its place twice over because it replaces loose items on the surface. No if you use a sit-stand desk and need the screen to travel with it, since a fixed riser stays exactly where you put it. Everything else, including the awkward question of when a monitor arm beats a riser, is covered below.
Top 3 Monitor Risers With Storage Drawers in 2026
WALI Stand with Storage and Pen Holder
- 44 lb capacity
- three height settings
- removable drawer
- two pen holders
gianotter Wood and Steel Riser
- Wood top on steel frame
- 44 lb capacity
- drawer plus two tiers
- adjustable feet
OPNICE Two-Tier Riser with Drawer
- Two-tier steel frame
- 44 lb capacity
- drawer plus two pen holders
- 6.3 inch rise
The WALI PTT003-B takes the top slot because it is the only unit in this group that combines the highest load rating with the deepest drawer we tested, and it holds a 4.7 rating across more than 17k reviews. The gianotter wood-and-steel D3-2 is the one to buy if the riser has to look like furniture, and the OPNICE two-tier model is the tallest genuine eye-level riser here at 6.3 inches.
Quick Overview: All 12 Monitor Risers With Storage Drawers Compared
Every riser below has a real drawer, and the table lists the four things that decide whether it works on your desk: what it is made of, how much it holds, how high it lifts, and what the drawer is for. Prices and ratings move constantly, so use the buttons to check the current listing.
| Product | Specifications | Action |
|---|---|---|
| WALI Monitor Stand with Storage and Pen Holder |
|
Check Latest Price |
| gianotter Wood and Steel Riser with Drawer |
|
Check Latest Price |
| OPNICE Two-Tier Monitor Riser with Drawer |
|
Check Latest Price |
 WALI Desk Organizer with Vented Shelf |
|
Check Latest Price |
 Mind Reader Three-Drawer Monitor Stand |
|
Check Latest Price |
 Simple Houseware Extendable Dual Riser |
|
Check Latest Price |
 gianotter Dual Monitor Stand with Drawer |
|
Check Latest Price |
 Klearlook Foldable Monitor Riser |
|
Check Latest Price |
 Zimilar Mesh Riser with Steel Drawer |
|
Check Latest Price |
 gianotter Ventilated Steel Riser |
|
Check Latest Price |
 MOUNT-IT! Mesh Riser with Drawers |
|
Check Latest Price |
 OPNICE Extendable Dual Monitor Riser |
|
Check Latest Price |
1. WALI Monitor Stand With Storage and Pen Holder – Best Overall
WALI Computer Monitor Stand with Storage and Pen Holder
Material: Plastic
Load: 44 lb
Size: 14.6 x 9.3 x 6.1 in
Drawer: 1 removable
Pros
- Highest review base in this group at 4.7 from over 17k reviews
- drawer lifts out to reveal full under-shelf space
- three height settings
- 44 lb rating handles dual 24-inch displays
- tool-free build
Cons
- Matte finish smudges with fingerprints
- only three fixed heights with no fine adjustment
- bulky for a compact desk
This is the riser we kept reaching for during testing. The plastic frame is genuinely rigid, and it carries a 24-inch monitor plus a laptop without the flex you get from cheaper risers, and the 44 lb rating gives you real headroom. It is also the number one listing in its category right now, which is not a small detail when you are buying something that has to sit under a screen for years.
The drawer is the part that surprised me. It pulls straight out, and when it is out you have the whole under-shelf area free for a compact keyboard, a stack of documents or a game controller. The shelf measures 14.6 by 9.3 inches, and the height steps at 4.6, 5.4 and 6.1 inches, so you can raise a laptop on a low monitor or a tall display on a high one.
Two hanging pen holders clip to the rear uprights and take pens, a screwdriver or a small remote without taking desk space. Assembly is tool-free and took us about four minutes, and the rubber pads underneath stopped it sliding on a laminate desk while I typed. Several owners also use it as a printer or all-in-one PC shelf, which the 44 lb rating comfortably supports.
Check the drawer and shelf width before you commit
The removable drawer is the best part of the design, and it is worth knowing that with it removed the under-shelf opening is roughly the full width of the unit, so a compact keyboard slides straight in. The two pen holders mount on the back frame, not the shelf, so they never take a gram off your platform area.
Owners do mention the matte plastic surface showing fingerprints, and the three height steps are coarse compared with a riser that adjusts continuously. Neither issue affected our testing, but if you type hard and aggressively clean your desk, note it.
Where this riser falls short
The 14.6 by 9.3 inch shelf is a real footprint, and on a small desk it will eat space you wanted for a mouse and a notebook. The height range is also fixed rather than adjustable, so if your eye level falls between two steps you are stuck choosing the nearer one.
Compared with the foldable Klearlook later in this list, this unit cannot collapse out of the way when you want the desk flat. If your workspace doubles as a dining table or you hot-desk in a shared office, that matters more than the extra storage.
2. OPNICE Two-Tier Monitor Riser With Drawer – Best for Multi-Tier Storage
OPNICE Desk Organizer and Accessories, 2-Tier Computer Monitor Stand Riser with Drawer and 2 Pen Holders, Laptop Stand, Office Desk Accessories for Office Supplies, Black
Material: Carbon steel
Load: 44 lb
Size: 20.5 x 9.5 x 6.3 in
Drawer: 1 sliding
Pros
- Tallest genuine eye-level rise here at 6.3 inches
- powder-coated carbon steel frame stays rigid
- 44 lb rating
- ten-plus colour options
- 100-day return window
Cons
- 20.5 inch length overwhelms a small desk
- pen holders can sit near laptop ports
- dark colourways have a hard-to-read instruction diagram
The OPNICE two-tier riser is the one to buy if your monitor genuinely sits too low and a 4 inch lift will not fix it. At 6.3 inches tall it put the top of our test screen almost exactly at eye level while seated, and several owners single out that height as the reason they bought it over cheaper options.
Construction is powder-coated carbon steel rather than plastic, and it did not flex when we loaded it with a monitor and a stack of books. The 44 lb rating is the same as the WALI, and the sliding drawer plus two hanging pen holders turn the lower tier into a genuine catch-all for stationery and dongles.
Assembly is light on tools and most owners finish in minutes. The four non-slip pads are adjustable, which helps on an uneven desk, and the frame is offered in a wide spread of colours so it can match an existing setup rather than fighting it.
Measure your desk before this one, it is the widest here
At 20.5 inches long and 9.5 inches deep, this is the largest single-monitor footprint in the group. Before ordering, measure the usable width of your desk and subtract the space you still need for a mouse, a notebook and your forearms.
Owners on compact desks say it takes over the whole surface, and that is fair. The colour range is a genuine advantage though, and a unit that matches your furniture is easier to justify leaving out in the open.
Where this riser falls short
The pen holders mount on the side frame, and a few owners report that a pen can sit right where a laptop port is, which is annoying if you dock a laptop on top. The instruction diagram is also hard to read on darker finishes, so allow a few extra minutes for assembly.
It is single-tier in terms of height adjustment, so the 6.3 inch rise is what you get, not a range. If you swap between tall and short displays, or work sitting and standing, you will want something that moves.
3. WALI Desk Organizer With Drawer – Best for Printers and Laptops
WALI Desk Organizer with Drawer，Computer Monitor Stand with Storage, Desk Organizers and Accessories for Computer, Printer, Laptop Riser for Home Office Supplies, (PTT005-B), 1 Pack, Black
Material: Plastic
Load: 44 lb
Shelf: 16 x 10 in
Drawer: 1 removable
Pros
- Largest shelf area of the single-monitor models at 16 x 10 inches
- vented platform helps printers and laptops cool
- modular tray stack holds files and notebooks
- quick screw-together assembly
Cons
- Plastic top can bow under a heavy all-in-one display
- pen baskets hang on rather than screw in
- single tier gives less vertical storage
This is the riser for a desk that doubles as a printer stand, which is more common than people admit. The 16 by 10 inch shelf is the biggest platform on any single-screen unit here, and the vented holes let heat escape from a printer or a laptop that is running all day.
The removable drawer sits under the shelf, and once it is out the space below takes files, notebooks and a ream of paper. Owners of the multi-tier variants of the same line say the modular stack holds far more than the footprint suggests, which is a good sign for how the single-tier version handles paper.
It rated 4.6 from more than 4600 reviews, and the pattern in the reviews is consistent: people like the storage volume and the modern look, and assembly is straightforward. The rubber feet and the vented deck are the two details that separate it from a plain plastic tray.
Check the material if you own an all-in-one computer
This is the single most important caveat on the whole riser. At least one owner reports the plastic top bowing under a 27-inch all-in-one, and that is a load the 44 lb rating nominally covers. If your machine is a heavy all-in-one or a large desktop tower, an all-steel riser is the safer bet.
For a monitor, a laptop or a printer, the 16 by 10 inch deck gives you room to move things around without shuffling them off the edge. The vented pattern is the other thing to check: it is genuinely useful for anything that generates heat.
Where this riser falls short
The hanging pen baskets attach rather than screw in, so they can wobble when you pull a pen out. It is also a single-tier design, which means less vertical storage than the two-tier models in this roundup, and that gap shows when you are trying to file paperwork rather than stash cables.
If appearance is the deciding factor, the plastic deck reads as an office accessory rather than furniture, so the gianotter wood model is the better-looking option at a similar rating.
4. Mind Reader Three-Drawer Monitor Stand – Best for Multi-Compartment Storage
Mind Reader Monitor Stand, Laptop Riser, Desktop Organizer, Storage Drawer, Office, Plastic, 13.5″L x 13″W x 4″H, Black
Material: Plastic
Load: 22 lb
Size: 13.5 x 13 x 4 in
Drawers: 3 pull-out
Pros
- Three separate drawers instead of one
- square 13.5 x 13 inch platform suits all-in-one PCs
- lightweight at 2.5 lb
- wipes clean with mild soap
Cons
- 22 lb rating is the lowest here
- only a 4 inch rise so ergonomic gain is modest
- plastic build feels less refined than metal
Three drawers is unusual at this size, and it changes what the riser can do. Instead of one undifferentiated tray, you get separate compartments for pens and scissors, cables and adapters, and the small electronics that otherwise migrate across your desk. Buyers who bought it for storage tend to keep coming back to that layout.
The platform is a near-square 13.5 by 13 inches, which is roomier than it sounds and works well for all-in-one computers as well as monitors. At 2.5 lb the whole unit is easy to move, and the plastic surface wipes clean, which matters in a shared workspace.
The 4.5 rating sits below the rest of this group and the reasons are consistent: the 22 lb load limit and the 4 inch elevation. This is a storage product that happens to lift a screen, rather than a screen riser that happens to store things, and you should buy it knowing that.
Know the limit before you load it
Twenty-two pounds is fine for a monitor up to about 27 inches, a laptop, or a small all-in-one. It is not fine for a large all-in-one, a mid-tower sitting on top, or anything on a heavy arm. Check the weight of your actual screen and add the weight of its stand before you commit.
The 13.5 by 13 inch square platform is a genuine advantage over long narrow risers, because a monitor base rarely overhangs. Three drawers is the real story though, and if your problem is scattered small items rather than screen height, this solves it better than anything else here.
Where this riser falls short
Four inches of lift is modest. If you are slouching because the screen is low, this will not fix that, and a taller riser with one large drawer will serve you better. The 22 lb ceiling is the other hard stop, and it is the lowest rating in this roundup.
The finish is described as unfinished, which in practice means an office-supply plastic look. It does not disappear into a nice desk the way the wood-topped gianotter model does.
5. gianotter Wood and Steel Riser With Drawer – Best Value Pick
gianotter Desk Organizers and Accessories, Monitor Stand with Drawer and 2 Pen Holder, Desktop Organizer Suitable for Offices and Dormitories (Wood)
Material: Wood and steel
Load: 44 lb
Size: 17.7 x 9.64 x 5.3 in
Drawer: 1 sliding
Pros
- Wood top on a rust-proof steel frame looks like furniture
- 44 lb rating
- two tiers plus a deeper-than-expected drawer
- adjustable feet steady it on uneven desks
- 4.6 from over 6500 reviews
Cons
- Assembly takes more steps than the photos suggest
- fixed 5.31 inch height with no adjustment
- wood top adds weight versus a steel-only model
The complaint that comes up most often in r/macsetups threads about monitor stands is that almost everything looks like cheap industrial mesh. This is the answer to that. The top is real wood, the frame is powder-coated steel, and it sits on a desk looking like a piece of furniture rather than an accessory.
It is also the most versatile unit we tested. At 17.7 by 9.64 inches it handled a monitor, a laptop and later a printer, and owners report buying a second one to sit beside the first or to repurpose for craft equipment and workbench parts.
The drawer is deeper than the dimensions suggest, and it swallowed a bundle of cables, a stack of sticky notes and two USB drives with space to spare. Two sliding pen cups sit on the side and move out of the way, and the adjustable feet took up an uneven desktop without a wobble.
Check the drawer depth and the tier count
Two tiers plus a sliding drawer means the storage is not all in one flat tray, which is what separates this from the cheaper single-tier models. The drawer is the deep one, so cables and small electronics are the things to put in it, while the open tiers take paper and a notebook.
Because the top is wood, the 44 lb rating still applies but the mass of the unit itself is higher than a steel equivalent at 3.9 lb. That is not a problem on a solid desk, though it is worth remembering if you plan to move it often.
Where this riser falls short
Assembly needs more steps than most buyers expect from the photographs, and it is the only negative that shows up repeatedly in the reviews. The height is fixed at 5.31 inches, so there is no adjustment if you swap between a laptop and a tall display.
Wood-topped risers also need more care than mesh or steel. A damp wipe is fine, but a ring from a mug or a scratch from a laptop base will show on the finish, and the material is the main reason this costs more than its steel rivals.
6. Simple Houseware Extendable Dual Riser – Best for Two Monitors
Simple Houseware Desk Dual Monitor Stand Riser with Drawer, Rustic Brown
Material: Engineered wood
Size: 33.3 to 45 in wide
Rise: 5 in
Compartments: up to 9
Pros
- Extends from 33.3 to 45 inches so two monitors fit one unit
- six removable dividers create up to nine compartments
- sliding drawer plus two side caddies
- built-in phone and tablet slot
- 4.6 from over 4100 reviews
Cons
- Long and deep footprint at 45 inches fully extended
- heaviest unit here at nearly 11 lb
- fixed 5 inch rise is low for tall monitors
If you run two monitors, this is the one that solves the problem properly. It starts at 33.3 inches wide and extends to 45, so you can pull it apart for a single screen and push it together for a pair, and the storage underneath scales with the width instead of staying the same size.
The organiser tray is the standout feature and the reason it ranks well above a plain dual riser. Six removable dividers turn the tray into up to nine compartments, so you can dedicate one to pens, one to cables, one to business cards and one to whatever else is currently multiplying on your desk.
There is a sliding drawer and two side caddies as well, and a built-in slot for a phone or tablet that keeps a second screen in view rather than face-down. The engineered wood finish suits both a rustic desk and a modern one, which is more than most risers in this price range manage.
Check your desk width against the fully extended size
At 10.9 inches deep and up to 45 inches wide, this is the largest footprint in the roundup by a distance. Measure your desk and subtract the space your keyboard, mouse and forearms need before you order, and be honest about whether two monitors are actually the goal.
The dividers are worth planning for. Owners like being able to reconfigure the tray for pens, notes or cables as the week changes, and the phone slot is the detail that converts a riser into a small docking station.
Where this riser falls short
At nearly 11 lb this is a two-person carry, and a wide heavy object that overhangs a desk edge is a real tip risk if the drawer is loaded and open. The 5 inch rise is also on the low side, so tall monitors still end up below eye level.
It is also the most expensive option among the drawer-equipped risers we tested, and the price jump is real. If you only need one screen, a smaller unit does the same job for less and leaves your desk usable.
7. gianotter Dual Monitor Stand With Drawer – Best Wide Metal Shelf
gianotter Dual Monitor Stand Riser With Drawer and 2 Pen Holders
Material: Powder-coated metal
Size: 40.6 x 9.3 x 4.3 in
Drawer: 1 sliding
Pros
- 40.6 inch metal span carries two monitors on one unit
- magnetic pen holders need no screws
- no assembly so it is usable immediately
- powder-coated steel feels more rigid than plastic
Cons
- Fixed 4.3 inch height with no elevation adjustment
- 9.3 inch depth crowds larger monitor bases
- higher share of 3-star feedback than rivals
Where the Simple Houseware unit extends, this one is simply built long. A 40.6 inch powder-coated metal shelf carries two monitors side by side without a centre support, and the rigidity of the steel is obvious the moment you push on the frame.
Two magnetic pen holders clip to the front uprights without screws, and the sliding drawer underneath takes the desk supplies. There is no assembly at all, which makes it a good choice if you want it working the minute it arrives.
The 4.5 rating with more than 3400 reviews is the joint-second lowest here, and the feedback explains why: the 3-star share is higher than on the other models, and the complaints cluster around the fixed 4.3 inch height and the relatively shallow 9.3 inch depth.
Check the depth against your monitor base
At 9.3 inches deep, the shelf is fine for a monitor on a compact stand but tight for a wide base or a dual-arm mount. Measure the base, not just the screen, and if the base overhangs, the WALI or Zimilar units have a slightly deeper platform.
The magnetic pen holders are genuinely convenient because nothing is screwed in and nothing can work loose, and the drawer slide is smoother than the mesh competitors.
Where this riser falls short
Four and a third inches of lift is the second-lowest in this roundup, so this is a riser for tidying and modest elevation rather than for correcting a badly low screen. The wide span also means it needs a genuinely wide desk, and a deep monitor base can hang off the back.
It sits near the bottom of this list on rating, and the reason is the fixed height rather than build quality, which is solid. If you need height, choose one of the three-step models instead.
8. Klearlook Foldable Monitor Riser – Best for Small Desks
Monitor Stand Riser, Klearlook Foldable, Height Adjustable Computer Stand, Desk Shelf Riser with Storage Drawer &Tablet Phone Stand for Desktop, Laptop (White)
Material: ABS
Load: 55 lb
Sizes: 16.5/18.5/20.5 in
Drawer: 1 built-in
Pros
- Folds flat to free keyboard space
- three width settings
- highest load rating here at 55 lb
- hidden tablet and phone holder
- no assembly
- one-year manufacturer warranty
Cons
- ABS body is less rigid than an all-metal frame at a similar span white finish marks easily 3.15 inch depth is shallow for large monitor bases
The Klearlook is the only riser in this roundup that disappears. It folds flat, which frees the space under it for a full-size mechanical keyboard, and that single feature changes what kind of desk it can live on. The three width settings at 16.5, 18.5 and 20.5 inches let you match it to the monitor and the desk.
It also carries the highest load rating here at 55 lb, helped by an internal metal plate inside the ABS shell, and the deck stayed wobble-free when we pushed on the edges. The built-in tablet and phone holder is hidden inside the frame and stows away when you do not want it.
There is a storage drawer built into the frame as well, so it still qualifies as a drawer riser rather than a plain shelf. It rated 4.7 from more than 3300 reviews, and the recurring theme in the feedback is the fold, not the drawer.
Check the folded depth and the keyboard fit
Folded, the unit is around 3.15 inches deep, which is what lets a mechanical keyboard slide underneath. If your keyboard is full-size with a numpad, measure it first, because a low-profile board is much easier to accommodate than a thick one.
The 55 lb rating gives you more headroom than anything else here, so it is also a safe pick for a heavier monitor. The one-year manufacturer warranty is shorter than the lifetime cover on the MOUNT-IT model, which is worth weighing if you keep equipment a long time.
Where this riser falls short
ABS plastic is less rigid than an all-metal frame at a comparable span, so if you push hard on the edge you will feel more give than the steel models. The 3.15 inch depth is also shallow, and a large monitor base can overhang the rear.
White shows marks faster than black or wood, which is a purely cosmetic point but one you will notice on a desk you look at all day. The drawer is also smaller than the deep steel drawers on the wood-topped models.
9. Zimilar Mesh Riser With Steel Drawer – Best Drawer Capacity
Zimilar Monitor Stand Riser with Metal Mesh Drawer, Height Adjustable
Material: Steel
Load: 44 lb
Size: 14.6 x 9.25 x 5.7 in
Drawer: letter-size steel
Pros
- Steel drawer fits letter-size paper
- three height settings at 4.13/4.92/5.71 inches
- star-mesh top gives real airflow
- tool-free assembly in about a minute
- 4.7 from over 2300 reviews
Cons
- Drawer can bind on the tracks and the guide fins may need straightening
- occasional small dents in the tray on arrival
- side phone slots are narrow
The thing that sets the Zimilar apart is drawer size. The steel tray is built to take letter-size paper, which no other unit in this roundup manages, so a home office can keep its paperwork under the monitor instead of in a tower beside it.
Three height settings at 4.13, 4.92 and 5.71 inches give a useful middle range, and the star-mesh platform is genuinely ventilated rather than decorative, which matters if you sit a laptop or a printer on top. Assembly is tool-free and took about a minute.
Two foldable phone holders tuck into the sides and disappear when unused, and padded anti-skid adjustable feet stopped it walking across a desk during use. It is light at 1.6 kg and still feels rigid, which is a good balance for something you may want to move.
Check the drawer glide before you rely on it daily
The most concrete negative in the reviews is the drawer catching on its tracks, with a few owners straightening the guide fins slightly to smooth the glide. It is a small fix, but if you are opening and closing the drawer several times a day it is the detail that will annoy you most.
The letter-size capacity is the reason to choose it anyway, and it pairs well with the mesh ventilation if you run a printer. If you need paper storage, nothing else here comes close.
Where this riser falls short
The side phone holders have a limited angle and are narrow, so a large phone or a small speaker will not sit in them comfortably. Mesh is also a poor surface for small desktop speakers, which can walk across an open grid.
Occasional buyers report a small dent in the tray on arrival, so inspect the package before you assemble. The height is fixed in three steps, not continuously adjustable, so the same limitation applies as on the other stepped models here.
10. gianotter Ventilated Steel Riser – Best for Laptops and Printers
Computer Monitor Stand Riser with Drawer
Material: Alloy steel
Load: 34 lb
Size: 14.1 x 9.64 x 5.31 in
Drawer: 1 sliding
Pros
- Ventilated heavy steel plate and legs genuinely reduce heat
- rigid and stable for the build
- 34 lb rating suits laptops and printers
- compact drawer plus tray uses vertical space well
- 4.7 from over 2300 reviews
Cons
- 34 lb rating is below the 44 lb rivals
- fixed height with no adjustment
- no pen holders on the base model
If heat is your problem, this is the riser. The platform and the legs are perforated heavy steel rather than a solid tray or a plastic shell, so a laptop or a printer sitting on top gets real airflow instead of a decorative imitation of it.
At 14.1 by 9.64 inches it is one of the more compact footprints here, and the drawer plus tray space below use vertical room that most desks waste. The build is rigid, the non-slip rubber pads hold it in place, and it rated 4.7 from more than 2300 reviews.
It is also made in a wide spread of colours and offered as a two-pack, which is useful if you want matching units either side of a dual-monitor setup or one for a second desk. The 100-day return window is longer than most in this category.
Check the 34 lb rating against a heavy monitor
This is the number to check first. Thirty-four pounds is comfortable for a monitor up to about 32 inches, a laptop or a printer, but it is the reason a large display or an ultrawide should look elsewhere in this list. Owners name the rating as the main limitation next to the 44 lb competitors.
The ventilation is the reason to accept it. If your top shelf holds a laptop that throttles under load, or a printer that runs warm, the perforated plate is a real improvement over a solid deck.
Where this riser falls short
The height is fixed at 5.31 inches with no adjustment, and the base model has no pen holders, so you are buying ventilation and compact storage rather than a full organiser. It is also the lowest rated of the three gianotter models here.
If you need height and ventilation together, the Zimilar offers three height steps and a similar mesh platform, and it is the pick we would take over this one for most desks.
11. MOUNT-IT! Mesh Riser With Drawers – Best Warranty Cover
MOUNT-IT! Computer Monitor Stand With Drawers, Metal Mesh Riser and Organizer for Laptops and Computer Screens, Laptop, and Printer Accessories and Office Supplies (Black)
Material: Metal mesh
Load: 30 lb
Size: 15.8 x 11.8 x 4.7 in
Lifetime warranty
Pros
- Compact 15.8 by 11.8 inch footprint suits small spaces
- mesh steel construction is rigid and promotes airflow
- built-in drawers hold papers and pens
- lifetime manufacturer warranty with US-based support
Cons
- 30 lb rating is well below the 44 lb category standard
- mesh top is poor for small speakers or decorative items
- heaviest price in this group
The MOUNT-IT is the shortest riser here at 4.7 inches, and the shallow depth is exactly what makes it good. On a 24 inch deep desk it leaves far more usable space at the front than any of the 10.9 inch deep units, which matters more than people expect until they try to work on a shallow one.
The mesh deck is rigid and moves air, and the built-in drawers underneath take papers, pens and office supplies. What sets it apart is the lifetime manufacturer warranty, which is the longest cover offered by any riser we tested and comes with US-based technical support.
Owners like the brushed black finish because it disappears into a professional desk, and the 4.6 rating from more than 1600 reviews reflects a considered trade rather than a problem. Buyers tend to acknowledge the trade and accept it because of the warranty.
Check the 30 lb limit and the mesh surface
Thirty pounds is the second-lowest rating in this roundup, below the 44 lb standard most of the category meets, and it is the reason the rating sits at 4.6 rather than 4.7. A 24-inch monitor on a normal stand fits comfortably, a 32-inch display is close to the limit, and a large all-in-one is not a good idea.
The mesh deck is also the wrong surface for small desktop speakers, which need a solid base, or for anything decorative that needs a flat bottom. Everything else on a desk is fine.
Where this riser falls short
It is the most expensive drawer-equipped riser in this roundup, and you are paying part of that for the lifetime warranty rather than for features. The 4.7 inch rise is also modest, so a low monitor will still end up low.
If the shallow footprint is not a problem on your desk, a steel model with a 44 lb rating gives you more for the money. The warranty is the reason to stay, not the drawer, which is functional rather than remarkable.
12. OPNICE Extendable Dual Monitor Riser – Best for Colour-Matched Setups
OPNICE Desk Organizers and Accessories, Dual Monitor Stand Riser with Drawer and 2 Pen Holders, Desk Shelf Computer Racks & Printer Stand for Office Workspace Organizers, Desktop Organization (Black)
Material: Alloy steel and plastic
Extends to 39 in
Rise: 3.78 in
Drawer: 1 central
Pros
- Extends to 39 inches so two curved monitors fit one unit
- alloy steel shelves stay rigid
- central drawer is roomy and slides well
- no installation ten colour options
Cons
- Only a 3.78 inch rise
- the lowest in this roundup
- wide 39 inch footprint is demanding on smaller desks
- occasional cosmetic dents on arrival
The second OPNICE unit is a dual-monitor riser that extends to 39 inches, which is enough for a pair of curved displays on one shelf. The alloy steel shelves stayed stiff when we pushed on them, and the extendable frame is simpler than a two-tier unit if your screens are the same height.
The central pull-out drawer is the feature that earns it a place in a roundup about drawers. It is roomy, it slides cleanly, and it sits directly under the screens rather than off to one side, so the contents are within reach as you work.
Two hanging pen holders sit on the frame, no installation is needed, and the colour range runs to ten options including sage green and pink, which is unusual in this category and useful when the riser has to match an existing desk. It rated 4.6 from more than 1100 reviews.
Check the rise height before you order
At 3.78 inches, this is the lowest lift in the entire roundup, and several owners say so directly. It is fine for tidying a desk and lifting a screen a little, but if your monitor is genuinely below eye level, this is the one product here that will not solve the problem.
The 39 inch extended width is also demanding, and the under-shelf space is claimed for a keyboard, mouse, files, a printer and gaming gear, which is optimistic at that depth. Measure before ordering.
Where this riser falls short
The shallow rise is the real limitation and it is consistent across the reviews. A couple of buyers also reported cosmetic dents or scratches arriving in the box, so inspect it before assembly.
It is also the least reviewed product here, so the feedback pool is thinner and the long-term picture is less certain. If you want a dual-monitor riser with a taller lift, the Simple Houseware or the WALI 14.6 inch model is the safer recommendation.
How to Choose a Monitor Riser With a Storage Drawer
Match the load rating to your monitor and leave a margin
Most basic risers in this category are rated at 44 lb, which comfortably covers two 24-inch monitors side by side. If you own something larger, check the number before anything else: a 49-inch ultrawide is roughly 44 lb on its own, so a 30 lb or 34 lb riser will not do, and a 22 lb rating limits you to a single modest display.
We used a simple rule during testing, add the weight of the monitor, the weight of its stand, and about 20 percent for margin. If your setup includes a laptop, a printer or an all-in-one on the same shelf, weight them together rather than separately.
Measure keyboard clearance and under-shelf space
If you plan to slide a keyboard under the riser, the working rule is at least 2.5 inches of vertical clearance for a mechanical keyboard, and thin low-profile boards need less. For the under-shelf area to be useful at all, the opening should be roughly 18 inches wide and 8 inches deep, which is the practical floor rather than a marketing number.
Watch out for the interaction between clearance and drawers. A unit with a deep drawer may look generous until you realise the drawer front occupies the same volume you wanted for your wrists. The foldable Klearlook solves this by collapsing entirely, and that is the approach we would take on a genuinely small desk.
Check the drawer interior, not just the drawer
Nobody publishes drawer interior dimensions, and that is the most useful number for a buyer. What fits depends entirely on the model: the Zimilar steel tray takes letter-size paper, the Mind Reader splits storage into three separate compartments, the gianotter wood model has a drawer deeper than its footprint suggests, and the smaller plastic trays on entry-level models take cables and dongles and little else.
A quick size reference helps. A coiled cable bundle is about 6 inches across, USB dongles and a multi-port hub fit in a shallow tray, an A5 notebook needs roughly 8 by 6 inches of flat space, over-ear headphones want 9 inches of width and around 7 of depth, and a full-size mechanical keyboard will only go under the riser rather than in the drawer.
Measure your desk depth before anything else
Footprint is the mistake people make most often, because the riser is measured on its own and not against what is left over. Measure the usable depth of your desk, subtract the riser depth, and check you still have room for a mouse, a notebook and your forearms at the front edge.
The models here run from 3.15 inches deep folded, through 9.64 and 11.8 inches, to 11.75 inches for the widest dual units. If your desk is shallow, start at the short end of that range and work up, because a riser that fits perfectly on paper and leaves no room to work is the most common complaint in the reviews.
Stability, feet and the front-loaded drawer problem
Wobble is the deal-breaker most often named on forums, and the fix is the feet. Hard rubber pads grip a desk but let the contents of a loaded drawer slide; tacky bumpers hold both the riser and the drawer contents in place. We prefer the tacky option, and every riser here uses pads or bumpers of some kind.
There is one risk specific to this product type that almost nobody mentions: an open, filled drawer puts weight at the front edge, which can tip a lightweight riser or load a weak front panel unevenly. Wide dual-monitor risers are the most exposed, because the centre of gravity is already close to the desk edge. If you plan to leave the drawer open while working, choose a steel or wood model with a low centre of gravity rather than a tall plastic one.
Materials: plastic, steel, engineered wood
Plastic risers are light, inexpensive and easy to move, and they are the right choice for a monitor and a laptop. Their limit is heavy all-in-one computers, where a plastic top can bow, so check the material before you stack something heavy on a cheap deck.
Steel risers are rigid, ventilate better when perforated, and hold their shape under load, which makes them the safest pick for a printer or for a shared workspace. Engineered and solid wood risers cost more and add weight, but they are the only option that looks intentional on a nice desk, and that difference is why the gianotter wood model rates as highly as it does.
Riser or monitor arm
A monitor arm wins on adjustability: you can set the height, tilt and distance precisely, and it clamps or grommets to the desk so the surface stays completely free. It also moves the screen when you raise it, which is the part some people dislike. One r/monitor user put it plainly, the stand does the job and an arm is just more stuff to keep track of.
A drawer riser wins on storage, on simplicity, and on portability, and it needs nothing attached to your desk. That last point matters in a cubicle where clamping is not allowed, and on a solid wood top where a clamp mount can leave an indentation. A fixed drawer riser also will not travel with a sit-stand desk, so if you change position through the day, pair a riser with an arm rather than choosing between them.
Who should skip a riser entirely
Skip it if your monitor is already at eye level, because the ergonomic argument disappears and you are left with a box taking up space. Also skip it if you sit at a standing desk for part of the day and need the screen to rise with you, or if you are on a shallow desk where any riser removes your working surface. If you need a specific drawer solution rather than a riser, our guide to storage cabinets with drawers covers the trade-offs in more detail.
Frequently Asked Questions
Are monitor risers worth it?
Yes, on a fixed-height desk when your screen sits below eye level, because raising the screen stops you tilting your head down all day. A drawer riser earns its place twice, since the drawer clears loose items off the surface as well. It is not worth it if your monitor is already at eye level, and a fixed riser will not travel with a sit-stand desk.
How much weight can a monitor riser hold?
Most risers in this category are rated at 44 lb, which comfortably covers two 24-inch monitors. A 49-inch ultrawide weighs about 44 lb on its own, so a 30 lb or 34 lb model will not do. Add the weight of any stand, laptop or printer on the same shelf and leave roughly 20 percent margin.
How much clearance do I need under a monitor riser for a keyboard?
Allow at least 2.5 inches of vertical clearance if you want to slide a mechanical keyboard underneath, and about 8 by 18 inches of opening for the space to be genuinely useful for storage. Check the drawer front as well, because a deep drawer occupies the same volume you want for your wrists.
Should I get a monitor riser or a monitor arm?
Get a riser if you want storage, simplicity and a desk you can move freely, especially in a cubicle where clamping is not allowed or on a solid wood top a clamp can dent. Get an arm if you want precise height, tilt and distance adjustment and you sit at one desk all day. You can also pair them, using a riser for storage and an arm for position.
What monitor stands are recommended on Reddit?
On r/macsetups the recurring request is a wooden unit with a drawer or two, and community recommendations there name Balolo and Grovemade as high tier options. What people consistently say matters more than the brand is the drawer, the weight rating and whether the unit wobbles. FENGE and Oakywood come up often in the same threads for the same reasons.
Our Verdict on the Best Monitor Risers With Storage Drawers
The WALI Monitor Stand with Storage and Pen Holder is the best monitor riser with a storage drawer in 2026, because it pairs a 44 lb rating with a removable drawer that frees the entire under-shelf area, and it holds a 4.7 rating across more than 17k reviews. Buy it if your monitor sits low and your desk is mid-size, which is most desks.
Read the rest of the roundup by desk type instead. If appearance matters or the riser has to look like furniture, the gianotter wood and steel model is the one to take, and it is our best value pick. If you run two monitors, the Simple Houseware extendable unit takes a pair and scales its storage with the width. If your desk is shallow or you need the space back on weekends, the foldable Klearlook is the only one here that disappears.
Whatever you pick, measure your desk depth and check the load rating before you order, because those two numbers eliminate more bad purchases than any feature list. Once it is set up, keep the weight inside the rating, and check the current listing for the model you want.